Cable Category:

Connector Category:

Oculink SFF-8611 to SFF-8639+15P SATA Cable

Oculink SFF-8611 to SFF-8639+15P SATA Cable Series: OcuLink Series PCIe Gen 3.0 & 4.0 Compliant Cable Length: 1.0 Meter Signal Wire Size: 30-34AWG Contact Coating: Au 30u"

Table of Contents

Series:  OcuLink Series 
PCIe Gen 3.0 & 4.0 Compliant 
Cable Length: 1.0 Meter
Signal Wire Size: 30-34AWG 
Contact Coating: Au 30u”

Features

1. Compliance with SFF-8611 standard
2. Small size design: pitch 0.6mm
3. 4x 41Pin connector type, and support straight, right angle and side exit
4. 85 ohm impedance design for PCIe application
5. 30-34AWG are available for both discrete and ribbon cable

Mechanical Characteristic
1. Mating force:  150N maximum
2. Un-mating force: 50N maximum
3. Rated durability cycles: 250 cycles minimum 

Electrical Characteristic
1. Voltage: 30VAC per contact
2. Current: 1.0A per contact
3. Dielectric Withstanding Voltage: 300 VDC minimum for 100 ms
4. Insulation Resistance: 10 MΩ minimum between adjacent pins

Product Environmental Compliance
1. RoHS2.0: Compliant
2. China RoHS: Yes
3. REACH SVHC: Yes
4. Low-Halogen Status: Not Reviewed

Application
1. Data center & Networking Equipment
2. Servers/Storage Devices
3.SAS/SATA/PCIe HBA Interfaces
4. Switches/Routers
5. Wireless Base Stations and Radios

message board

Fill out the form below, and we will contact you as soon as possible.

Cable Category:

Connector Category: